I-Chuanrong's Mission ihlinzeka ngamakhasimende ahlukene ngesixazululo esiphelele sokuma esisodwa sohlelo lwePlasitiki Puble. Kunganikezela ngensizakalo eklanywe kahle, eyenziwe ngezifiso yephrojekthi yakho.

I-HDPE yenziwe ngokuhlangana yindlela enkulu yamapayipi ePolyethylene Prespress Piplems. Ingxenye ehlanganisiwe yikhetho lokuqala kumadayimitha amakhulu afanele. Ipayipi eliphakeme kakhulu nendlela efanele ye-welding kubaluleke kakhulu ukuqinisekisa ukuqina okudingekayo, ukufana namandla.

Ukufakwa kwemihlangano namandla alo okuhlalisa ama-engeli angewona akwesiko, ukufakwa kwakhiwe kuvame ukusetshenziswa kuzinhlelo zokusebenza ezingama-630mm kanye nezinkulundawo ezibunjiweyo lapho kungasebenzi khona. Ukwazi ukusebenzisa amaseli akhethekile wokufuya ukuze akhiqize amakhono nokukhiqiza, ukuguquguquka kwawo kuvumela ukudala ncamaphi ukuthi amakhasimende adingayo yini.

Kubalulekile ukwazi ukuthi ukufakwa kwe-HDPE okwenziwe ngamapayipi e-HDPE kuzobe sekunciphise izilinganiso zokucindezela. Ingcindezi ephezulu yokusebenza evunyelwe izohlelwa uma ukufakwa kwakhiwe kunamathiselwe kwipayipi, futhi ama-geometries ahlukile we-PE afanelekile anezinhlobo ezahlukene.

I-HDPE yakhiwa ama-fittings 30/45/60 degree y tee butt-welding hdpe fittings

Izinhlobo	Ukucacisa	Ububanzi (mm)	Ukucindezela
I-HDPE izingxenye ezihlanganisiwe	I-Elbow: 11.25˚ 22.5 ˚ 30˚ 45˚ 90˚	DN110-1800mm	I-PN6-PN16
	I-Equal Tee	DN110-1600mm	I-PN6-PN16
	Ukunciphisa Tee	DN110-1600mm	I-PN6-PN16
	I-Lateral Tee (45 Deg Y Tee)	DN110-1200mm	I-PN6-PN16
	Inkathazo	DN110-1200mm	I-PN6-PN16
	Ukunciphisa isiphambano	DN110-1200mm	I-PN6-PN16

Uyemukelwa ukuvakashela ifektri yethu noma ukuqhuba ukucwaningwa kwamabhuku okuvela eceleni.

Uyemukelwa ukuxhumana nathi ngemininingwane yemikhiqizo kanye nensizakalo efanelekile.

Sicela uthumele i-imeyili ku:chuangrong@cdchuangrong.com

Ukuchazwa Komkhiqizo

Ama-HDPE Pipe Fittings, abizwa nangokuthi ukufakwa kwamapayipi wePolyethylene Page noma ukufakwa kwezikhulumi, asetshenziselwa ukuxhumeka kwezinhlelo ze-HDPE Piping. Ngokuvamile, ukufakwa kwamapayipi we-HDPE amapayipi kuyatholakala ekucushweni okuvame kakhulu kwabakholwayo, ama-tees, ama-elbows, ama-elbows, ama-stub flanges & saddles., Njll.

Ama-HDPE Pipe Fittings, enziwa ngezinto ezisezingeni eliphezulu zekhwalithi, ziyindlela efanelekile yokuxhumana kwepayipi le-HDPE elenziwa yithi. Ukufakwa kwamapayipi we-HDPE kunganikezwa kumabanga ahlukahlukene, okuhlanganisa ukufakwa kwezimali okuhlanganisiwe kwe-butt, ama-eflectroful e-electroflusion, ukufakwa kwezimali kwe-PP kanye ne-PP

I-HDPE Welded Pipe Fittings: I-Elbow (11.5 degree, ama-30,5 degree, ama-30 degree, ama-45 degree, ama-degree angama-75, ama-engle angahle akwenziwe ngokwezifiso). Tee, oblique tee, y-hlobo tee, isiphambano, nezinye izithako ezenziwe ngokwezifiso zamapayipi ahlukahlukene adinga ukwakhiwa kwamakhasimende. Konke lokhu kufakwa kwakhiwa kwakhiwa futhi kuhlolwe ngokuya nge-ASTM 2206 - "Ukucaciswa okujwayelekile kokufakwa kwe-polyethylene yepulasitiki." Ngokuya nge-ISO 4427, EN12201, ISO 14001, i-ISO 9001, njengoba / NZS 4129 PE ukufakwa kwamazinga, ama-ISO4437 amazinga njll.

Ibizo	I-HDPE izindwangu ezihlanganisiwe
Into uqobo lwayo	I-PE100 / PE80
Ibanga elinquma phakathi ububanzi besingelezi	I-DN90-DN1200
Umbala	Omnyama, grey, owolintshi, owenziwe ngezifiso
Ukuthayipha	Iqonde, 90 ° Ellow, 45 ° Ellow, Flange, End cap, i-tee elilinganayo, ukunciphisa okuqondile, ukunciphisa i-tee njll.
Ukucindezela	I-PN10, PN12.5, PN16, PN20
-Vamile	I-GB / T 13663.3-2018, ISO 4427, EN 12201
Izinga lokushisa nokubanda	-20 ° C ~ 40 ° C
Isicelo	Ukunikezwa kwegesi, ukuhlinzekwa kwamanzi, ukudonsa, ukwelashwa kwendle, amapayipi amamayini nama-slurry, ukunisela, njll
Isishuqulu	Ibhokisi, i-polybag, ibhokisi lemibala noma elenzelwe ngokwezifiso
Okom	-Tholakala
Hlangana	I-Buttfusion Welding, Flanged Joint

I-Chuankong ineqembu elihle kakhulu labasebenzi elinolwazi olucebile. Uthishanhloko wayo ubuqotho, uchwepheshe futhi usebenza kahle. Isungule ubudlelwano bebhizinisi namazwe angaphezu kwama-80 kanye nezindawo embonini ehlobene. Njenge-United States, eChile, eGuyana, i-United Arab Emirates, Saudi Arabia, Indonesia, Malaysia, i-Bangladesh, Mongolia, eRussia, i-Afrika nokunye.

Uyemukelwa ukuxhumana nathi ngemininingwane yemikhiqizo kanye nensizakalo efanelekile.

Sicela uthumele i-imeyili ku: chuangrong@cdchuangrong.com noma Ucingo: + 86-28-84319855

Okwedlule: Idizayini ekhethekile ye-PE100 ye-Cross Fipe Fipe Fipe Fipe Eled Busion Fitting Fitting

Olandelayo:

I-HDPE yakhiwa ama-fittings 30/45/60 degree y tee butt-welding hdpe fittings

ukucacisa	L1 mm	L2 mm	L mm
			θ = 45 °	θ = 60 °
I-225	Umfana no-180	500	999	940
25	-Mashumi	500	I-1054	989
I-280	Ama-220	500	1116	I-1043
315	I-240	500	I-1186	I-1104
355	I-240	500	1242	U-1150
400	270	500	1336	1232
I-450	300	500	1437	1627
500	320	I-650	1678	1548
I-560	350	I-650	1792	1647
630	400	I-650	Ngo-1941	1777

Uyemukelwa ukuxhumana nathi ngemininingwane yemikhiqizo kanye nensizakalo efanelekile.

Sicela uthumele i-imeyiliku: chuangrong@cdchuangrong.com noma Ucingo: + 86-28-84319855

I-ChuanGrong inezindlela eziphelele zokutholwa nazo zonke izinhlobo zemishini yokutholwa esezingeni eliphezulu ukuqinisekisa ukulawulwa kwekhwalithi kuzo zonke izinqubo ezivela kumkhiqizo ophelile kuMkhiqizo ophelile. Imikhiqizo ihambisana ne-ISO4427 / 4437, ASTMD3035, EN12201/1555, DIN8074, AS / NIS4130 Okujwayelekile, futhi ivunyelwe yi-ISO9001-2015, CE, BV, SGS, SGS.